Description
This is a factory replacement motor for your Thermax Terminator CP-5 Vacuum Motor, 120 volt. Fits machines that were manufactured prior to 2007. This motor measures 7.2 inches diameter. NOTE: THIS IS THE MOTOR FOR THE OLDER MACHINE. IF YOUR CP-5 IS NEWER THAN 2007, THIS MOTOR WILL NOT FIT! YOU MUST ORDER MOTOR MTR934.
This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life.
It is suggested you replace the motor gasket part # MTR511
Uses motor brushes part # MTR500
*We reserve the right to substitute a motor with a motor of equal or better performance. The substituted motor will be a manufacturer’s direct recommended replacement motor that is in factory new condition. The reason for substitution may be due to a discontinued motor or lack of production stock. We make every effort to provide you with the motor that you originally ordered. If you have any questions or concerns please contact us prior to placing your order.
Installation note:
Over-tightening of the mounting screws may cause the fan casing to push into the fan blades and may damage the fans. This situation is not covered under the Motor Warranty Program and will not be approved if submitted. If motor is turned in under warranty and is found to have the type of damage explained above, the warranty will be denied. When mounting your new motor, in most cases a touch BEYOND “finger tight” is all that is required to mount and seat the motor sufficiently.
