Description
New Lamb Ametek Flo-Tek Generation II 119892-00 1 stage 9.0″ Blower Motor, 120 volt.
This motor is equipped with standard motor brushes. If you would like the same motor except with interrupter motor brushes, see our part #MTR1371 Interrupter style carbon brushes have an ‘auto-stop’ device that shuts the motor down before damage can be done to the commutator.
Please note: If this motor is ordered we will ship you the 119892-04 version which is the same exact motor with exception to the brushes. We will include an extra set standard motor brushes.
For Replacement Interrupter style carbon brushes, please see our part #MTR2227.
If you would like to use our standard motor brushes, see our part #MTR507
Motor Specs
- Motor Type: Bypass
- Discharge: Tangential
- Bearings: Double Ball Bearing
- Sealed Vacuum: 71.2 inches
- Maximum Air Watts: 833
- Maximum Air Flow: 244.5 CFM
- Maximum Amps: 15.5
- Motor Speed: 27,680 RPM
*We reserve the right to substitute a motor with a motor of equal or better performance. The substituted motor will be a manufacturer’s direct recommended replacement motor that is in factory new condition. The reason for substitution may be due to a discontinued motor or lack of production stock. We make every effort to provide you with the motor that you originally ordered. If you have any questions or concerns please contact us prior to placing your order.
Installation note:
Over-tightening of the mounting screws may cause the fan casing to push into the fan blades and may damage the fans. This situation is not covered under the Motor Warranty Program and will not be approved if submitted. If motor is turned in under warranty and is found to have the type of damage explained above, the warranty will be denied. When mounting your new motor, in most cases a touch BEYOND “finger tight” is all that is required to mount and seat the motor sufficiently.
