Description
New Lamb Ametek 116409-29 motor is 2-stage, 5.7 inch, 36 volt.
This motor has a 1 1/2 inch tube on the base of the motor.
It is suggested that you replace the motor gasket, see our part MTR512.
Uses motor brushes part MTR520.
Motor Specs
- Motor Type: Bypass
- Discharge: Tangential
- Bearings: Double Ball Bearing
- Sealed Vacuum: 62.8 inches
- Maximum Air Watts: 163
- Maximum Air Flow: 77.0 CFM
- Maximum Amps: 15.1
- Motor Speed: 18,475 RPM
This is a special order motor.
Installation note:
Over-tightening of the mounting screws may cause the fan casing to push into the fan blades and may damage the fans. This situation is not covered under the Motor Warranty Program and will not be approved if submitted. If motor is turned in under warranty and is found to have the type of damage explained above, the warranty will be denied. When mounting your new motor, in most cases a touch BEYOND “finger tight” is all that is required to mount and seat the motor sufficiently.
