Description
New Lamb Ametek 116161-00 motor is a 3-stage, 7.2 inch, 120 volt.
There is no substitute for this motor! This motor has an inlet tube on the bottom (intake) side!
It is suggested that you replace the motor gasket, part #MTR511.
Uses motor brushes part MTR500.
Motor Specs
- Motor Type: Bypass
- Discharge: Tangential
- Bearings: Double Ball Bearing
- Sealed Vacuum: 134 inches
- Maximum Air Watts: 113
- Maximum Air Flow: 92 CFM
- Maximum Amps: 13.7
- Motor Speed: 13,300 RPM
This is a special order motor.
Installation note:
Over-tightening of the mounting screws may cause the fan casing to push into the fan blades and may damage the fans. This situation is not covered under the Motor Warranty Program and will not be approved if submitted. If motor is turned in under warranty and is found to have the type of damage explained above, the warranty will be denied. When mounting your new motor, in most cases a touch BEYOND “finger tight” is all that is required to mount and seat the motor sufficiently.
