Description
This is an Ametek Vacuum Motor for your Eureka models CV1801K, CV1801L, CV1801M, CV1804 and Eureka CVS5000 120 volt.
It has more than a 1/2″ taper at the bottom (see additional picture).
It is suggested you replace the original motor gasket with 2 each of our motor gasket part #MTR512.
If you prefer the genuine motor which includes the original gasket see our part ##MTR2228.
Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MTR553.
Uses motor brushes part MTR523.
Installation note:
Over-tightening of the mounting screws may cause the fan casing to push into the fan blades and may damage the fans. This situation is not covered under the Motor Warranty Program and will not be approved if submitted. If motor is turned in under warranty and is found to have the type of damage explained above, the warranty will be denied. When mounting your new motor, in most cases a touch BEYOND “finger tight” is all that is required to mount and seat the motor sufficiently.
