Description
This is an Ametek Vacuum Replacement Motor for your Beam/Electrolux/Eureka Central Vacuum #140411, 120 volt.
Please Note: The bottom of this motor is not flat, it tapers down over 1/2 inch. If your motor does not taper and is completely flat on the bottom you will need to order a different motor. Please give us a call at 877-822-7868 to determine your correct motor replacement.
GASKET IS INCLUDED!
Uses motor brushes part #MTR523.
Fits the following Beam, Electrolux, and Eureka Models:
- Beam part #140411
- Beam part #140414
- Beam 2775
- Beam 2775VIL
- Beam 750
- Beam 775
- Beam 775A
- Electrolux/CentraLux E130A
- Electrolux/CentraLux E130B
- Electrolux/CentraLux E130F
- Electrolux/CentraLux E130G
- Electrolux/CentraLux E130J
- Electrolux/CentraLux 1590
- Eureka CV137G
- Eureka CV137H
- Eureka CV1801K
- Eureka CV1801L
- Eureka CV1801M
- Eureka CV1804
- Eureka CV3291A
- Eureka CV3291B
- Eureka CV3291D/F
- Eureka CVS5000
Also replaces the following models and/or part numbers:
- Ametek 119631
- Ametek 119708
- Airflo CFM-3
- ElectroMotor 6600-001 EA28 B-11 ECP
- ElectroMotor 600-1 ECV B-9 ECP
- ElectroMotor 6600-0001
- Frigidaire FCV460S
- Frigidaire FCV520S
- Frigidaire FGCV520SQ
- Honeywell H602
- Honeywell H702
- NuTone VX475
- NuTone VX475C
Installation note:
Over-tightening of the mounting screws may cause the fan casing to push into the fan blades and may damage the fans. This situation is not covered under the Motor Warranty Program and will not be approved if submitted. If motor is turned in under warranty and is found to have the type of damage explained above, the warranty will be denied. When mounting your new motor, in most cases a touch BEYOND “finger tight” is all that is required to mount and seat the motor sufficiently.
